Open Info Page
Owner Name: {OWNER_NAME}
Owner Address: {ADDRESS1} {ADDRESS2}, {CITY}, {STATE} {ZIP} {COUNTRY}
Site Address: {SITUS_STRE}, {SITUS_CITY}, {SITUS_ZIP}
Open Info Page
Owner Name: {OWNER_NAME}
Owner Address: {ADDRESS1} {ADDRESS2}, {CITY}, {STATE} {ZIP} {COUNTRY}
Site Address: {SITUS_STRE}, {SITUS_CITY}, {SITUS_ZIP}
The dataset consists of tiled orthogonal imagery produced from nadir images captured by Pictometry International. Automatic aerial triangulation (AAT) was performed. The triangulated frames were rectified to a DEM. Mosaicking was performed using an automatic seaming algorithm and manually edited to eliminate seams through elevated features where possible.
This image data is the result of private and government entities working together under the guidance of Thurston County GIS staff. Fugro USA Land, Inc. acquired Digital Imagery with sensor
Leica geosystems ADS80 SH82 for areas of the Thurston County, WA project area July 3 - July 14, 2018. The project encompassed an area of approximately 806 square miles. A Leica ADS80 SH82 Digital Camera system
including an inertial measuring unit (IMU) and a dual frequency airborne GPS receiver was used for the digital image acquisition. Imagery acquisition was performed July 3 - July 14, 2018 at 2400 feet AMT (3\") 4800 feet AMT (6\")
(above mean terrain), with 30 percent sidelap between the flight lines. Ground control survey was provided by the True North Land Surveying and supplemented with existing control.
Digital orthophotos in 8-bit RGB and 16-bit CIR (4-band)GeoTIFF format were produced with resolutions of 3\" and 6\" utilizing the ADS80 SH82 imagery and the newly-produced auto-correlated DSM (digital surface model) from the 2018 imagery.
Delivery was on an External Hard Drive.
Digital aerial imagery for Washington state was collected by Hexagon as part of the 2019 NAIP Imaging Program. Imagery was collected between June 30, 2019 and November 2, 2019 using Leica ADS100 digital camera systems. The project was flown at heights ranging from 16,500 ft msl to 20,500 ft msl resulting in a nominal GSD of 30cm. Four band images were collected to support both 3-band natural color (RGB) and false color infrared (FCIR) orthoimage products. Aerotriangulation and orthorectification were done with the Leica Xpro software package, version 6.4 and ortho mosaics were created with Inpho Orthovista 8.0. 4-band RGBN 8-bit Ortho images were created in a DOQQ tiling scheme.Date stamps for Thurston County flights are 08/05/19, 08/26/19, 10/10/19
This image data is the result of private and government entities working together under the guidance of Thurston County GIS staff. Fugro USA Land, Inc. acquired Digital Imagery with sensor
Leica geosystems ADS80 SH82 for areas of the Thurston County, WA project area July 3 - July 14, 2018. The project encompassed an area of approximately 806 square miles. A Leica ADS80 SH82 Digital Camera system
including an inertial measuring unit (IMU) and a dual frequency airborne GPS receiver was used for the digital image acquisition. Imagery acquisition was performed July 3 - July 14, 2018 at 2400 feet AMT (3\") 4800 feet AMT (6\")
(above mean terrain), with 30 percent sidelap between the flight lines. Ground control survey was provided by the True North Land Surveying and supplemented with existing control.
Digital orthophotos in 8-bit RGB and 16-bit CIR (4-band)GeoTIFF format were produced with resolutions of 3\" and 6\" utilizing the ADS80 SH82 imagery and the newly-produced auto-correlated DSM (digital surface model) from the 2018 imagery.
Delivery was on an External Hard Drive.
This image data is the result of private and government entities working together under the guidance of Thurston County GIS staff. Fugro USA Land, Inc. acquired Digital Imagery with sensor
Leica geosystems ADS80 SH82 for areas of the Thurston County, WA project area July 3 - July 14, 2018. The project encompassed an area of approximately 806 square miles. A Leica ADS80 SH82 Digital Camera system
including an inertial measuring unit (IMU) and a dual frequency airborne GPS receiver was used for the digital image acquisition. Imagery acquisition was performed July 3 - July 14, 2018 at 2400 feet AMT (3\") 4800 feet AMT (6\")
(above mean terrain), with 30 percent sidelap between the flight lines. Ground control survey was provided by the True North Land Surveying and supplemented with existing control.
Digital orthophotos in 8-bit RGB and 16-bit CIR (4-band)GeoTIFF format were produced with resolutions of 3\" and 6\" utilizing the ADS80 SH82 imagery and the newly-produced auto-correlated DSM (digital surface model) from the 2018 imagery.
Delivery was on an External Hard Drive.
Digitial aerial imagery for Washington state was collected by North West Geomatics Ltd as part of the 2017 NAIPImaging Program. Imagery was collected between July 8, 2017 and October 29, 2017 using Leica ADS100 digitalcamera systems. The project was flown at heights ranging from 16,500 ft msl to 21,500 ft msl resulting in a nominalGSD of 30cm. Four band images were collected to support both 3-band natural color (RGB) and false color infrared(FCIR) orthoimage products. Aerotriangulation and orthorectification were done with the Leica Xpro software package,version 6.3 and ortho mosaics were created with Inpho Orthovista 7.0. 4-band RGBN 8-bit Ortho images were createdin a DOQQ tiling scheme. Products are in the UTM map projection, NAD83 (HARN) datum, in meters. The data wasreprojected by Washington Department of Natural Resources into Stateplane South/ North HARN and non-HARNdependinig on county requests.Date stamps for Thurston County flights are 07/31/17, 09/01/17